DT125R ARCHIVE

NEV · NEV

SWINGARM[URL=http://imageshack.us/photo/my-images/210/swingarm2.jpg/][IMG]http://img210.imageshack.us/img210/8713/swing...

stillbroke · stillbroke

Hi ive got the opportunity to get myself a wr 200 swingarm and was just wondering on the fitment as they look like it will fit . im sure it has been done on this forum before but ive been away for awile and still have my old gurl! Cheers sean

ringo67 · ringo67

as the intention of swapping the wheels of a dt when I get one I have already have a complete sc front end.obviously I cannot use the upside down forks but the wheel, brake unit and disc will be ok what I would like to know is can I use the sc swing arm with out much hassle ? as I have found out the sc uses the dtr...

oliw · oliw

Anyone got any ideas how to get it out? ****ted it with a hammer for 6 hours an nothing moved, had penetrating oil and a blow torch an not moved a single mm! hahah ITs my swingarm bush thats seized onto the pivot bolt :/ if worst case i need it grinding out which part do i gring? between swingerand engine or...

L_COLE · L_COLE

Hi all Just a quick question, will a 2001 Yamaha dtr swingarm be compatible with a 2005 dt re frame? Lance -- Edited by L_COLE on Sunday 25th of May 2014 07:07:32 PM

gooner78 · gooner78

I've just removed my engine ready for a rebuild and found that i can push the swingarm bushes out with my fingers, is the mormal as I thought they had to be pressed in and out.

Boxing · Boxing

Hi. I'm stripping my DT down to repray it, but the pivot bolt just will not budge, tried taking the weight off of the back wheel and still nothing. Sprayed it in WD 40, and still solid like it's welded on. :| Absolute pain in the backside, don't really want to damage the bushes or anything like that gett...

tunertom · tunertom

what is involved when you guys get your swinger powdercoated? ive never had a look whats in the swinger. what needs removing before powdercoating? as my local powdercoaters arent too good at masking up. also, if i remove everything from the swinger, what do i need to buy to replace and how much woul...

ShaunyBoy · ShaunyBoy

ok frame is ready to be sent to the coaters, and the swing arm is too (i hope) just clearing up a question in my own mind. as u can see from the pic there aperas to be a metel sleeve inside the dog bone linkage, do i have to remove these or leave them to be masked off by the coaters? nto i have removed the bolt the in...

FunkeyMunkeyDavid · FunkeyMunkeyDavid

[IMG]https://i1094.photobucket.com/albums/i458/funkymunkydavid/my%20ol%20toy/012-...

TheSnake1 · TheSnake1

So ive sent my swingarm to powder coat and knocked out all the bushes and bearings including the suspension linkage bushes and for genuine parts i priced it up at about £70 :( does anyone know where i could get pattern/cheap linkage bushes and swingarm needle rollers and oil seals? i may be able to salva...

Reef · Reef

plannig to spray my swingarm when I change to chain setup to the 520 conversion, question is what prep is involved and what paint, similar to prepping panels, i.e. use smooth grade wet and dry, primer, paint, laq, and also main question, what paint please is best, spraying it black?? :) Thanks

hairdoo · hairdoo

Ive found that so long as washed thoroughly nitromors works pretty damn well stripped my swingarm n tank in no time

hairdoo · hairdoo

when tightening the swingarm pivot bolt does rear wheel need to be off the floor ? Doo

zooankski · zooankski

Got the swing arm back from powder coat minus every bush and bearing. i have a slinky glide kit that i believe is just for the front of the swing arm but what the hell goes where the dogbone bolt passes through? i can't see it on any schematics unless it is part 21 in the swing arm one????????? Also i am sure th...

Ralzy · Ralzy

Bit of a mad question but does anyone know the dtr swinging arm weight as I won one off fleabay as I`m expecting another delivery today so I could leave the mrs at home for delivery and pick it up myself have no toast rack so i would have to bungy tie it in my back pack or is this just a stupid weight to carry on my...

Steady Eddy · Steady Eddy

just been on Wemoto looking at the slinky swing arm bush/ bearing kits now for my 89 model they quote £23 now I am trying to fit the 2000 0ne it goes in but then I have found play in the swing arm to dog bone bush so looked up 2000 bush/bearing kit £13 , so what is the difference ?? which one will I need to get to get...

Steady Eddy · Steady Eddy

What fits what ,will the swing arm shock of a 2000 bike fit a 89 bike , I see on wemoto that the bush kits are different so does that mean they will not inter change ?? they 89 bush kit costs £23 the 2000 ones costs £13 whats the difference ,does any one know ?? at the same time where can you get the shock botto...

Blinners · Blinners

Hi looking for the swing arm bolt and dog bone bolt torque 2003 DTR if anyone can help Cheers Blinners

hairdoo · hairdoo

Spent all afternoon strippin rear end of my bike down in a desperate hope of stoppin the rust attack on my 6 yr old dtx so far so good it all came apart easily no stickin spindles or anything gonna clean up the bits n pieces and respray the arm as in near future im avin it powder coated , fittin shorter dog bon...

TheSnake1 · TheSnake1

Im after a new swing arm for my '99 dtr and ive seen a '07 dtx one on ebay and was wondering if there is any difference between the dtr swingarm and dtx swingarm?

northy2111 · northy2111

Ive suddenly got a really annoying rear suspension squeek. It seems to be from the spring, but Im not too sure .I,ve spent ages trying to find exactley where its from and it,s doing my head in now!. If I sit on or put any pressure on the seat you hear the squeek, the more you push down, the more it squeeks. As...

hairdoo · hairdoo

might just be thick but need to ask whats best way to jack up the bike to remove shock n swing arm obviously i cant use my paddock stand , av a trolley jack tho n axle stands any thoughts ?? cheers Dave

The_DtR_Maniac1991 · The_DtR_Maniac1991

is the swing arm colour a normal silver on the DTR'S or is a a certain silver, Im wanting to strip mine down in the summer, and re spray it all as the swing arms going a bit rusty, and might re spray all the other silver parts of the bike,, any recommendations?

dan · dan

Has anyone tried to use 4 bearings instead of 2 bearings and 2 bushings ??? My setup is destroyed so it's hard to tell, but it looks like the bushings and bearings are the same size except for the width, which I don't think would matter.

Topic		Started By	Replies	Views	Last Post
	STICKY: DT125R SWINGARM - PARTS BREAKDOWN (Preview) SWINGARM[URL=http://imageshack.us/photo/my-images/210/swingarm2.jpg/][IMG]http://img210.imageshack.us/img210/8713/swing...	NEV	0	1699	Jun 24, 2012 by NEV
	hi all wr200 conversion? (Preview) Hi ive got the opportunity to get myself a wr 200 swingarm and was just wondering on the fitment as they look like it will fit . im sure it has been done on this forum before but ive been away for awile and still have my old gurl! Cheers sean	stillbroke	4	2199	May 31, 2015 by the only way is YAMAHA DTR
	gilera sc 125 (Preview) as the intention of swapping the wheels of a dt when I get one I have already have a complete sc front end.obviously I cannot use the upside down forks but the wheel, brake unit and disc will be ok what I would like to know is can I use the sc swing arm with out much hassle ? as I have found out the sc uses the dtr...	ringo67	10	2121	Dec 7, 2014 by ringo67
	swingarm bolt stuck! bushes seized (Preview) Anyone got any ideas how to get it out? ****ted it with a hammer for 6 hours an nothing moved, had penetrating oil and a blow torch an not moved a single mm! hahah ITs my swingarm bush thats seized onto the pivot bolt :/ if worst case i need it grinding out which part do i gring? between swingerand engine or...	oliw	0	1714	Sep 15, 2014 by oliw
	Swingarm compatibility (Preview) Hi all Just a quick question, will a 2001 Yamaha dtr swingarm be compatible with a 2005 dt re frame? Lance -- Edited by L_COLE on Sunday 25th of May 2014 07:07:32 PM	L_COLE	0	1671	May 25, 2014 by L_COLE
	swingarm bushes (Preview) I've just removed my engine ready for a rebuild and found that i can push the swingarm bushes out with my fingers, is the mormal as I thought they had to be pressed in and out.	gooner78	2	1675	Jun 22, 2013 by ShaunyBoy
	Pivot stuck :\| (Preview) Hi. I'm stripping my DT down to repray it, but the pivot bolt just will not budge, tried taking the weight off of the back wheel and still nothing. Sprayed it in WD 40, and still solid like it's welded on. :\| Absolute pain in the backside, don't really want to damage the bushes or anything like that gett...	Boxing	14	2498	May 8, 2013 by Calum122
	Powdercoating swingarm procedure? (Preview) what is involved when you guys get your swinger powdercoated? ive never had a look whats in the swinger. what needs removing before powdercoating? as my local powdercoaters arent too good at masking up. also, if i remove everything from the swinger, what do i need to buy to replace and how much woul...	tunertom	10	1979	Mar 20, 2013 by Seiki
	ready for coaters? or maybe not? (Preview) ok frame is ready to be sent to the coaters, and the swing arm is too (i hope) just clearing up a question in my own mind. as u can see from the pic there aperas to be a metel sleeve inside the dog bone linkage, do i have to remove these or leave them to be masked off by the coaters? nto i have removed the bolt the in...	ShaunyBoy	10	2175	Mar 5, 2013 by ShaunyBoy
	yz rear swinger/shock (Preview) [IMG]https://i1094.photobucket.com/albums/i458/funkymunkydavid/my%20ol%20toy/012-...	FunkeyMunkeyDavid	25	2122	Dec 6, 2012 by FunkeyMunkeyDavid
	Swingarm bushes/bearings (Preview) So ive sent my swingarm to powder coat and knocked out all the bushes and bearings including the suspension linkage bushes and for genuine parts i priced it up at about £70 :( does anyone know where i could get pattern/cheap linkage bushes and swingarm needle rollers and oil seals? i may be able to salva...	TheSnake1	14	2040	Oct 25, 2012 by NathanH
	Spraying? (Preview) plannig to spray my swingarm when I change to chain setup to the 520 conversion, question is what prep is involved and what paint, similar to prepping panels, i.e. use smooth grade wet and dry, primer, paint, laq, and also main question, what paint please is best, spraying it black?? :) Thanks	Reef	12	2038	Sep 28, 2012 by AndyYam
	paint tripper (Preview) Ive found that so long as washed thoroughly nitromors works pretty damn well stripped my swingarm n tank in no time	hairdoo	0	1530	Sep 27, 2012 by hairdoo
	swingarm bolt (Preview) when tightening the swingarm pivot bolt does rear wheel need to be off the floor ? Doo	hairdoo	3	1755	Sep 8, 2012 by Calum122
	swingarm dogbone bushings? (Preview) Got the swing arm back from powder coat minus every bush and bearing. i have a slinky glide kit that i believe is just for the front of the swing arm but what the hell goes where the dogbone bolt passes through? i can't see it on any schematics unless it is part 21 in the swing arm one????????? Also i am sure th...	zooankski	2	1568	Aug 2, 2012 by zooankski
	dtr swinging arm weight (Preview) Bit of a mad question but does anyone know the dtr swinging arm weight as I won one off fleabay as I`m expecting another delivery today so I could leave the mrs at home for delivery and pick it up myself have no toast rack so i would have to bungy tie it in my back pack or is this just a stupid weight to carry on my...	Ralzy	19	2898	Jun 30, 2012 by Nathlaad
	What's the difference (Preview) just been on Wemoto looking at the slinky swing arm bush/ bearing kits now for my 89 model they quote £23 now I am trying to fit the 2000 0ne it goes in but then I have found play in the swing arm to dog bone bush so looked up 2000 bush/bearing kit £13 , so what is the difference ?? which one will I need to get to get...	Steady Eddy	7	1950	Apr 8, 2012 by mr karnage
	will 2000 swing arm fit 89 frame (Preview) What fits what ,will the swing arm shock of a 2000 bike fit a 89 bike , I see on wemoto that the bush kits are different so does that mean they will not inter change ?? they 89 bush kit costs £23 the 2000 ones costs £13 whats the difference ,does any one know ?? at the same time where can you get the shock botto...	Steady Eddy	7	2134	Apr 3, 2012 by Steady Eddy
	torque settings (Preview) Hi looking for the swing arm bolt and dog bone bolt torque 2003 DTR if anyone can help Cheers Blinners	Blinners	5	2147	Apr 1, 2012 by NORFE
	swingarm tidy up needed (Preview) Spent all afternoon strippin rear end of my bike down in a desperate hope of stoppin the rust attack on my 6 yr old dtx so far so good it all came apart easily no stickin spindles or anything gonna clean up the bits n pieces and respray the arm as in near future im avin it powder coated , fittin shorter dog bon...	hairdoo	0	1531	Mar 24, 2012 by hairdoo
	dtx swing arm on dtr (Preview) Im after a new swing arm for my '99 dtr and ive seen a '07 dtx one on ebay and was wondering if there is any difference between the dtr swingarm and dtx swingarm?	TheSnake1	1	1621	Mar 24, 2012 by Calum122
	Squeeky rear suspension (Preview) Ive suddenly got a really annoying rear suspension squeek. It seems to be from the spring, but Im not too sure .I,ve spent ages trying to find exactley where its from and it,s doing my head in now!. If I sit on or put any pressure on the seat you hear the squeek, the more you push down, the more it squeeks. As...	northy2111	10	2025	Mar 21, 2012 by Calum122
	SWING ARM REMOVAL QUERY (Preview) might just be thick but need to ask whats best way to jack up the bike to remove shock n swing arm obviously i cant use my paddock stand , av a trolley jack tho n axle stands any thoughts ?? cheers Dave	hairdoo	7	1607	Mar 19, 2012 by NORFE
	Swing arm colour (Preview) is the swing arm colour a normal silver on the DTR'S or is a a certain silver, Im wanting to strip mine down in the summer, and re spray it all as the swing arms going a bit rusty, and might re spray all the other silver parts of the bike,, any recommendations?	The_DtR_Maniac1991	2	1707	Mar 8, 2012 by NORFE
	Swingarm bearings/bushings (Preview) Has anyone tried to use 4 bearings instead of 2 bearings and 2 bushings ??? My setup is destroyed so it's hard to tell, but it looks like the bushings and bearings are the same size except for the width, which I don't think would matter.	dan	1	1850	Nov 27, 2011 by Extinction
1 2 > Last» \| Page of 2 sorted by